重庆本地建站,标智客免费logo设计,推广文案,网站开发的基本流程安装环境 本人当前的安装环境#xff1a; 树莓派5Raspberry Pi os (64-bit) Debian12 Bookworm 镜像下载地址 我这里是将镜像安装好后直接安装opencv#xff0c;如果不是刚安装好的镜像需要注意是否有openCV的python之类的安装过#xff0c;不然可能出现编译错误 一、扩展内…
安装环境 本人当前的安装环境 树莓派5Raspberry Pi os (64-bit) Debian12 Bookworm 镜像下载地址 我这里是将镜像安装好后直接安装opencv如果不是刚安装好的镜像需要注意是否有openCV的python之类的安装过不然可能出现编译错误 一、扩展内存
确保树莓派有足够空间
sudo raspi-config打开配置界面 配置高级设置 确保所有SD卡可用 根据提示重启树莓派即可 二、建立安装脚本
#创建安装脚本
touch Opencv-4-8-0.sh
#给权限
sudo chmod 777 Opencv-4-8-0.sh 脚本名最好保持一致或者是不能被opencv*识别到 因为脚本中有sudo rm -rf opencv*可能会删除掉脚本 填充脚本内容 脚本获取链接由此入 | 直接复制我下面的内容都是一模一样的
#!/bin/bash
set -e
install_opencv () {
echo case cat /etc/debian_version in
10*) echo Detecting Debian 10, Buster. ;;
11*) echo Detecting Debian 11, Bullseye. ;;
12*) echo Detecting Debian 12, Bookworm. ;;
esacecho
echo Installing OpenCV 4.8.0
echo It will take minimal 2 hour !
cd ~
# install the dependencies
sudo apt-get install -y build-essential cmake git unzip pkg-config
sudo apt-get install -y libjpeg-dev libtiff-dev libpng-dev
sudo apt-get install -y libavcodec-dev libavformat-dev libswscale-dev
sudo apt-get install -y libgtk2.0-dev libcanberra-gtk* libgtk-3-dev
sudo apt-get install -y libgstreamer1.0-dev gstreamer1.0-gtk3
sudo apt-get install -y libgstreamer-plugins-base1.0-dev gstreamer1.0-gl
sudo apt-get install -y libxvidcore-dev libx264-dev
sudo apt-get install -y python3-dev python3-numpy python3-pip
sudo apt-get install -y libv4l-dev v4l-utils
sudo apt-get install -y libopenblas-dev libatlas-base-dev libblas-dev
sudo apt-get install -y liblapack-dev gfortran libhdf5-dev
sudo apt-get install -y libprotobuf-dev libgoogle-glog-dev libgflags-dev
sudo apt-get install -y protobuf-compiler#get TBB
case cat /etc/debian_version in
10*) sudo apt-get install -y libtbb2 libtbb-dev libdc1394-22-dev;;
11*) sudo apt-get install -y libtbb2 libtbb-dev libdc1394-22-dev;;
12*) sudo apt-get install -y libtbbmalloc2 libtbb-dev;;
esaccd ~
sudo rm -rf opencv*
# download the 4.8.0 version
wget -O opencv.zip https://github.com/opencv/opencv/archive/4.8.0.zip
wget -O opencv_contrib.zip https://github.com/opencv/opencv_contrib/archive/4.8.0.zip
# unpack
unzip opencv.zip
unzip opencv_contrib.zip
# Some administration to make life easier later on
mv opencv-4.8.0 opencv
mv opencv_contrib-4.8.0 opencv_contrib
# clean up the zip files
rm opencv.zip
rm opencv_contrib.zip# set install dir
cd ~/opencv
mkdir build
cd build# run cmake
cmake -D CMAKE_BUILD_TYPERELEASE \
-D CMAKE_INSTALL_PREFIX/usr/local \
-D OPENCV_EXTRA_MODULES_PATH~/opencv_contrib/modules \
-D ENABLE_NEONON \
-D WITH_OPENMPON \
-D WITH_OPENCLOFF \
-D BUILD_TIFFON \
-D WITH_FFMPEGON \
-D WITH_TBBON \
-D BUILD_TBBON \
-D WITH_GSTREAMERON \
-D BUILD_TESTSOFF \
-D WITH_EIGENOFF \
-D WITH_V4LON \
-D WITH_LIBV4LON \
-D WITH_VTKOFF \
-D WITH_QTOFF \
-D WITH_PROTOBUFON \
-D OPENCV_ENABLE_NONFREEON \
-D INSTALL_C_EXAMPLESOFF \
-D INSTALL_PYTHON_EXAMPLESOFF \
-D PYTHON3_PACKAGES_PATH/usr/lib/python3/dist-packages \
-D OPENCV_GENERATE_PKGCONFIGON \
-D BUILD_EXAMPLESOFF ..# run make
make -j4
sudo make install
sudo ldconfig# cleaning (frees 320 MB)
make clean
sudo apt-get updateecho Congratulations!
echo Youve successfully installed OpenCV 4.8.0 on your Raspberry Pi 64-bit OS
}cd ~if [ -d ~/opencv/build ]; thenecho echo You have a directory ~/opencv/build on your disk.echo Continuing the installation will replace this folder.echo printf Do you wish to continue (Y/n)?read answerif [ $answer ! ${answer#[Nn]} ] ;then echo Leaving without installing OpenCVelseinstall_opencvfi
elseinstall_opencv
fi
三、一键安装
脚本会自行执行 安装依赖/编译/安装 过程-耐心等待即可 如果出现下述问题 由此入访问此链接 运行脚本 整个过程约一段时间
./Opencv-4-8-0.sh 这个地方会卡好一会后面就是安装了-----安装完成 可喜可贺
