网站模板制作教程视频,网站规划的缩略图,腾讯企点和企业qq区别,电子商务网站建设开发华为Atlas 300I 推理卡显卡安装
参考链接#xff1a; https://support.huawei.com/enterprise/zh/doc/EDOC1100115618/c5bac9d1
确认操作系统
查询服务器当前运行环境的操作系统架构及版本
uname -m cat /etc/*release获取软件包 下载对应版本的包 A800-3000-NP…华为Atlas 300I 推理卡显卡安装
参考链接 https://support.huawei.com/enterprise/zh/doc/EDOC1100115618/c5bac9d1
确认操作系统
查询服务器当前运行环境的操作系统架构及版本
uname -m cat /etc/*release获取软件包 下载对应版本的包 A800-3000-NPU-CentOS7.6-ARM-V1.4.3.run
NPU 1.X.X 软件包版本类型
创建运行用户
root用户下执行
groupadd HwHiAiUser
useradd -g HwHiAiUser -d /home/HwHiAiUser -m HwHiAiUser -s /bin/bash确认安装方式
uname -r
gcc -v
lsmod|grep drv_pcie_host
lspci | grep d100安装驱动适用于.run格式 安装NPU 1.X.X系列版本驱动包
切换至root用户
su root
进入软件包所在路径
cd /data/soft/
增加软件包的可执行权限
chmod x A800-3000-NPU-CentOS7.6-ARM-V1.4.3.run
校验run安装包的一致性和完整性
./A800-3000-NPU-CentOS7.6-ARM-V1.4.3.run --check
打印如下:
Verifying archive integrity... 100% MD5 checksums are OK. All good.未指定安装路径:默认安装 如果用户不需要指定安装路径安装包会安装到默认路径“/usr/local/HiAI”下 安装命令: ./A800-3000-NPU-CentOS7.6-ARM-V1.4.3.run --full如果提示安装成功,需要重启时: reboot,没有提示要重启,就不需要重启
查看驱动加载是否成功
npu-smi info安装固件适用于.run格式 使用NPU 1.X.X系列版本软件包安装时固件包集成在驱动包内安装或升级驱动过程中会自动安装和升级固件。
npu-smi -v
npu-smi info
npu-smi info -l
npu-smi info watch -i 0 -c 2 -d 5 -s ptaicmb NPU 1.X.X 软件包版本 不支持docker容器内安装,卸载完,安装 NPU 20.2.X
卸载驱动适用于.run格式
卸载NPU 1.X.X系列版本驱动
su root
cd /data/soft
./A800-3000-NPU-CentOS7.6-ARM-V1.4.3.run --uninstall卸载固件适用于.run格式 卸载NPU 1.X.X系列版本软件包时固件包集成在驱动包内卸载驱动会自动卸载固件。
安装NPU 20.X.X A300-3000-3010-npu-driver_20.2.2_centos7.6-aarch64.run
创建运行用户
root用户下执行
groupadd HwHiAiUser
useradd -g HwHiAiUser -d /home/HwHiAiUser -m HwHiAiUser -s /bin/bash安装NPU 20.X.X及以上系列版本驱动包
切换至root用户
su root
进入软件包所在路径
cd /data/soft/
增加软件包的可执行权限
chmod x A300-3000-3010-npu-driver_20.2.2_centos7.6-aarch64.run
校验run安装包的一致性和完整性
./A300-3000-3010-npu-driver_20.2.2_centos7.6-aarch64.run --check
打印如下:
Verifying archive integrity... 100% SHA256 checksums are OK. All good.未指定安装路径:默认安装 如果用户不需要指定安装路径软件包默认安装路径/usr/local/Ascend 安装详细日志路径/var/log/ascend_seclog/ascend_install.log。 安装命令:
./A300-3000-3010-npu-driver_20.2.2_centos7.6-aarch64.run --full安装提示: 驱动包安装成功 安装/升级需要重启才能生效
Driver package install success! Reboot needed for installation/upgrade to take effect! 重启
reboot查看驱动加载是否成功
npu-smi info
显示如下:npu-smi 20.2.2 Version: 20.2.2 查看芯片固件版本号请执行
/usr/local/Ascend/driver/tools/upgrade-tool --device_index -1 --component -1 --version安装固件适用于.run格式
切换至root用户
su root
进入软件包所在路径
cd /data/soft/
增加软件包的可执行权限
chmod x A300-3000-3010-npu-firmware_1.76.22.10.220.run
校验run安装包的一致性和完整性./A300-3000-3010-npu-firmware_1.76.22.10.220.run --check
打印如下:
Verifying archive integrity... 100% SHA256 checksums are OK. All good.安装命令
./A300-3000-3010-npu-firmware_1.76.22.10.220.run --full
提示: 固件包安装成功 安装/升级需要重启才能生效
Firmware package install success! Reboot needed for installation/upgrade to take effect! 重启
reboot执行如下命令查看芯片固件版本号。若与目标版本一致则说明安装成功。
/usr/local/Ascend/driver/tools/upgrade-tool --device_index -1 --component -1 --versionDocker 容器安装 宿主机目录挂载容器 前提条件 宿主机已经安装过Driver软件包。 需用户在宿主机自行安装docker使用NPU 20.0.X和NPU 20.1.X系列版本软件包安装时版本要求大于等于18.03。
docker pull ubuntu:18.04
docker imagesid HwHiAiUser
gid1001(HwHiAiUser)在宿主机创建并启动docker容器
使用NPU 20.2.X及以上系列版本软件包安装时请执行如下命令
docker run -it --nethost --cap-add LINUX_IMMUTABLE --device/dev/davinci0 --device/dev/davinci_manager --device/dev/devmm_svm --device/dev/hisi_hdc -v /usr/local/bin/npu-smi:/usr/local/bin/npu-smi -v /usr/local/Ascend/driver/lib64/:/usr/local/Ascend/driver/lib64/ ubuntu:18.04 /bin/bashls /dev/ | grep davinci*groupadd -g 1001 HwHiAiUser useradd -g HwHiAiUser -d /home/HwHiAiUser -m HwHiAiUser echo ok使用NPU 20.2.X及以上系列版本软件包安装时执行如下命令
export LD_LIBRARY_PATH/usr/local/Ascend/driver/lib64:$LD_LIBRARY_PATH查看驱动加载是否成功
npu-smi info
显示如下成功:npu-smi 20.2.2 Version: 20.2.2 宿主机目录不挂载容器 前提条件 宿主机已经安装过Driver软件包。 需用户在宿主机自行安装docker使用NPU 20.0.X和NPU 20.1.X系列版本软件包安装时版本要求大于等于18.03。
docker run -it --nethost --pidhost --cap-add LINUX_IMMUTABLE --device/dev/davinci0 --device/dev/davinci_manager --device/dev/devmm_svm --device/dev/hisi_hdc -v /usr/local/bin/npu-smi:/usr/local/bin/npu-smi -v /data:/data ubuntu:18.04 /bin/bashgroupadd -g 1001 HwHiAiUser useradd -g HwHiAiUser -d /home/HwHiAiUser -m HwHiAiUser echo okdocker ps -a
docker cp /xxx/*.run container_id:/home/HwHiAiUser/software
docker cp /data/soft/A300-3000-3010-npu-driver_20.2.2_centos7.6-aarch64.run f621f77c310c:/home/HwHiAiUser/driverdocker start f621f77c310c
docker attach f621f77c310ccd /home/HwHiAiUser/
安装命令./driver --docker使用NPU 20.2.X及以上系列版本软件包安装时执行如下命令
export LD_LIBRARY_PATH/usr/local/Ascend/driver/lib64:$LD_LIBRARY_PATH查看驱动加载是否成功
npu-smi info
显示如下成功:npu-smi 20.2.2 Version: 20.2.2docker run -it \
--device/dev/davinci0 \
--device/dev/davinci_manager \
--device/dev/devmm_svm \
--device/dev/hisi_hdc \
-v /usr/local/bin/npu-smi:/usr/local/bin/npu-smi \
-v /usr/local/Ascend/driver:/usr/local/Ascend/driver \
-v /data:/data \
ascendhub.huawei.com/public-ascendhub/ascend-infer-arm:20.2.0 \
/bin/bashdocker run -it \
--device/dev/davinci0 \
--device/dev/davinci_manager \
--device/dev/devmm_svm \
--device/dev/hisi_hdc \
-v /usr/local/Ascend/driver:/usr/local/Ascend/driver \
-v /usr/local/bin/npu-smi:/usr/local/bin/npu-smi \
-v /data:/data ascendhub.huawei.com/public-ascendhub/ascend-infer:5.0.1-ubuntu18.04 \
/bin/bashai开源项目地址 https://gitee.com/ascend/samples
亮哥安装 cat /etc/redhat-release
CentOS Linux release 7.6.1810 (AltArch) uname -a
Linux localhost.localdomain 4.14.0-115.el7a.0.1.aarch64 #1 SMP Sun Nov 25 20:54:21 UTC 2018 aarch64 aarch64 aarch64 GNU/Linuxcat /etc/sysconfig/network-scripts/ifcfg-enp125s0f0
TYPEEthernet
PROXY_METHODnone
BROWSER_ONLYno
BOOTPROTOstatic
DEFROUTEyes
IPV4_FAILURE_FATALno
IPV6INITyes
IPV6_AUTOCONFyes
IPV6_DEFROUTEyes
IPV6_FAILURE_FATALno
IPV6_ADDR_GEN_MODEstable-privacy
NAMEenp125s0f0
UUIDc7f2acd8-f7d5-4ed7-a047-157326b16284
DEVICEenp125s0f0
ONBOOTyes
IPADDR192.168.141.77
PREFIX24
GATEWAY192.168.141.254
DNS1192.168.141.155
IPV6_PRIVACYno
ZONEpublicsystemctl restart networkuname -m cat /etc/*release./A300-3000-3010-npu-driver_21.0.1_linux-aarch64.run --install-usernameroot --install-usergrouproot --install-for-all --fullreboot./A300-3000-3010-npu-firmware_1.77.22.6.220.run --full/usr/local/Ascend/driver/tools/upgrade-tool --device_index -1 --component -1 --version./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --install-for-all./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --install./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --install --install-for-alluseradd -d /home/HwHiAiUser -m HwHiAiUser
passwd HwHiAiUser
chmod uw /etc/sudoers
vim /etc/sudoers
root ALL(ALL) ALLchmod u-w /etc/sudoers
gcc -Vyum install -y gcc g make cmake zlib1g zlib1g libsqlite3 openssl libssl-dev libffi unzip pciutils net-tools libblas gfortran libblas3 libopenblas
gcc -V
gcc --version./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --installtar -zxvf Python-3.7.5.tgz
cd Python-3.7.5./configure --prefix/usr/local/python3.7.5 --enable-loadable-sqlite-extensions --enable-shared
make -j8make install
yum -y install zlib*
make installpython3.7.5
sudo ln -s /usr/local/python3.7.5/bin/python3 /usr/local/python3.7.5/bin/python3.7.5
sudo ln -s /usr/local/python3.7.5/bin/pip3 /usr/local/python3.7.5/bin/pip3.7.5
vim /etc/profile
#用于设置python3.7.5库文件路径
export LD_LIBRARY_PATH/usr/local/python3.7.5/lib:$LD_LIBRARY_PATH
#如果用户环境存在多个python3版本则指定使用python3.7.5版本
export PATH/usr/local/python3.7.5/bin:$PATHsource /etc/profilepip3.7.5 install attrspip3.7.5 install psutil
pip3.7.5 install decorator
pip3.7.5 install numpy
pip3.7.5 install protobuf3.11.3
pip3.7.5 list
pip3.7.5 install attrs -i https://pypi.tuna.tsinghua.edu.cn/simple
yum -y install openssl openssl-devel
make -j8
make --installmake install
pip3.7.5 install attrs -i https://pypi.tuna.tsinghua.edu.cn/simple./configure --prefix/usr/local/python3.7.5 --enable-loadable-sqlite-extensions --enable-shared
make -j8
make install
pip3.7.5 install attrs -i https://pypi.tuna.tsinghua.edu.cn/simple
pip3.7.5 install psutil -i https://pypi.tuna.tsinghua.edu.cn/simple
pip3.7.5 install psutil
yum install libffi-devel
pip3.7.5 install psutil
./configure --prefix/usr/local/python3.7.5 --enable-loadable-sqlite-extensions --enable-shared
make -j8make install
pip3.7.5 install psutilpip3.7.5 install decorator numpy protobuf3.11.3 scipy sympy cffi grpcio grpcio-tools requests -i https://pypi.tuna.tsinghua.edu.cn/simple
pip3.7.5 install decorator numpy1.21.0 protobuf3.11.3 scipy sympy cffi grpcio grpcio-tools requests -i https://pypi.tuna.tsinghua.edu.cn/simple
yum install gfortran libopenblas-dev liblapack-dev libatlas-base-dev libblas-dev
pip3 install Cython
pip3.7.5 install decorator numpy1.21.0 protobuf3.11.3 scipy sympy cffi grpcio grpcio-tools requests -i https://pypi.tuna.tsinghua.edu.cn/simple
pip3 install numpy./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --install
vim /var/log/ascend_seclog/ascend_toolkit_install.log
groupadd usergroup
useradd -g usergroup -d /home/HwHiAiUser -m HwHiAiUser -s /bin/bash
usermod -g root HwHiAiUser
vim /etc/passwd
HwHiAiUser:x:1000:1002::/home/HwHiAiUser:/bin/bashcd anaconda-ks.cfg ./Ascend-cann-toolkit_3.3.0_linux-aarch64.run install
./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --install-for-all
./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --installmkdir Ascend
./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --install --install-path/root/Ascend/./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --install --install-path/root/Ascend/groupadd -g 1001 HwHiAiUser useradd -g HwHiAiUser -d /home/HwHiAiUser -m HwHiAiUser echo ok
./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --install
userdel -r HwHiAiUser
groupadd -g 1001 HwHiAiUser
userdel -r HwHiAiUser
kill -9 1
userdel -r HwHiAiUser
usermod -g 1001 HwHiAiUser
userdel -r HwHiAiUser
chmod uw /etc/sudoersvim /etc/sudoers
chmod u-w /etc/sudoers
usermod -g 1001 HwHiAiUseruserdel -r HwHiAiUser
groupadd -g HwHiAiUser HwHiAiUser
groups root
groups 1001
groups HwHiAiUser
vim /etc/group
HwHiAiUser:x:1002:groups HwHiAiUser
gpasswd -d HwHiAiUser root
groups HwHiAiUser
userdel -r HwHiAiUser
reboot
npu-smi infoyum install g
yum install gcc
yum install cmake
yum install -y cmake3
yum install -y gcc gcc-c make automake
strings /usr/lib64/libstdc.so.6 | grep GLIBC
yum install gcc
curl -Lks http://www.hop5.in/yum/el6/hop5.repo /etc/yum.repos.d/hop5.repo
yum install gcc gcc-g -ywget https://cmake.org/files/v3.10/cmake-3.10.0-rc3.tar.gz
yum install -y wget
tar -zxvf cmake-3.10.0-rc3.tar.gz
cd cmake-3.10.0-rc3/
./bootstrap
gmake
gmake install./Ascend-cann-toolkit_3.3.0_linux-aarch64.run --install
docker ps
docker exec -it f1aaffa8be63 bashcd /root/cann
ls
A300-3000-3010-npu-driver_21.0.1_linux-aarch64.run A300-3010-mcu_20.1.1.zip Ascend-cann-device-sdk_3.3.0_linux-aarch64.zip Ascend-cann-toolkit_3.3.0_linux-aarch64.run
A300-3000-3010-npu-firmware_1.77.22.6.220.run A300-3010-npu-driver-repack-tools_21.0.1.tar.gz Ascend-cann-nnrt_3.3.0_linux-aarch64.run lapack-3.9.0.tar.gz
A300-3010-mcu_20.1.1.bin Ascend-cann-benchmark_3.3.0-Linux-aarch64.zip Ascend-cann-toolbox_3.3.0_linux-aarch64.run驱动和固件相关软件保存到了百度网盘
链接: https://pan.baidu.com/s/13mam2d-lEIeYWWZO_j-j_Q 密码: r9gnvim ~/.bashrc export LD_LIBRARY_PATH$LD_LIBRARY_PATH:/usr/local/Ascend/driver/lib64:/usr/local/Ascend/driver/lib64/common:/usr/local/Ascend/driver/lib64/driver:/usr/lib64
export LD_LIBRARY_PATH$LD_LIBRARY_PATH:/usr/local/Ascend/ascend-toolkit/latest/fwkacllib/lib64:/usr/local/Ascend/ascend-toolkit/latest/atc/lib64
export PYTHONPATH$PYTHONPATH:/usr/local/Ascend/ascend-toolkit/latest/fwkacllib/python/site-packages:/usr/local/Ascend/ascend-toolkit/latest/toolkit/python/site-packages:/usr/local/Ascend/ascend-toolkit/latest/atc/python/site-packages:/usr/local/Ascend/ascend-toolkit/latest/pyACL/python/site-packages/acl
export PATH$PATH:/usr/local/Ascend/ascend-toolkit/latest/fwkacllib/ccec_compiler/bin:/usr/local/Ascend/ascend-toolkit/latest/fwkacllib/bin:/usr/local/Ascend/ascend-toolkit/latest/atc/bin
export ASCEND_AICPU_PATH/usr/local/Ascend/ascend-toolkit/latest
export ASCEND_OPP_PATH/usr/local/Ascend/ascend-toolkit/latest/opp
export TOOLCHAIN_HOME/usr/local/Ascend/ascend-toolkit/latest/toolkitexport install_path/usr/local/Ascend/ascend-toolkit/latest
export ASCEND_TENSOR_COMPLIER_INCLUDE${install_path}/atc/include/
#/home/twai/Ascend202/ascend-toolkit/20.2/
export DDK_PATH${install_path}/arm64-linux
export NPU_HOST_LIB${install_path}/acllib/lib64/docker pull ubuntu:18.04采用目录挂载方式 进入容器里 docker exec -it f1aaffa8be63 bash
cat ~/.bashrc
export LD_LIBRARY_PATH$LD_LIBRARY_PATH:/usr/local/Ascend/driver/lib64:/usr/local/Ascend/driver/lib64/common:/usr/local/Ascend/driver/lib64/driver
export LD_LIBRARY_PATH$LD_LIBRARY_PATH:/usr/local/Ascend/ascend-toolkit/latest/fwkacllib/lib64:/usr/local/Ascend/ascend-toolkit/latest/atc/lib64
export PYTHONPATH$PYTHONPATH:/usr/local/Ascend/ascend-toolkit/latest/fwkacllib/python/site-packages:/usr/local/Ascend/ascend-toolkit/latest/toolkit/python/site-packages:/usr/local/Ascend/ascend-toolkit/latest/atc/python/site-packages:/usr/local/Ascend/ascend-toolkit/latest/pyACL/python/site-packages/acl
export PATH$PATH:/usr/local/Ascend/ascend-toolkit/latest/fwkacllib/ccec_compiler/bin:/usr/local/Ascend/ascend-toolkit/latest/fwkacllib/bin:/usr/local/Ascend/ascend-toolkit/latest/atc/bin
export ASCEND_AICPU_PATH/usr/local/Ascend/ascend-toolkit/latest
export ASCEND_OPP_PATH/usr/local/Ascend/ascend-toolkit/latest/opp
export TOOLCHAIN_HOME/usr/local/Ascend/ascend-toolkit/latest/toolkitexport install_path/usr/local/Ascend/ascend-toolkit/latest
export ASCEND_TENSOR_COMPLIER_INCLUDE${install_path}/atc/include/
#/home/twai/Ascend202/ascend-toolkit/20.2/
export DDK_PATH${install_path}/arm64-linux
export NPU_HOST_LIB${install_path}/acllib/lib64/cd ~/samples/python/contrib/portrait_picture/model/
原始模型网络下载地址
wget https://modelzoo-train-atc.obs.cn-north-4.myhuaweicloud.com/003_Atc_Models/AE/ATC%20Model/PortraitNet%20/portrait.pb
对应的cfg文件下载地址
wget https://modelzoo-train-atc.obs.cn-north-4.myhuaweicloud.com/003_Atc_Models/AE/ATC%20Model/PortraitNet%20/insert_op.cfg执行命令报错,没有生成.om文件
atc --model./portrait.pb --insert_op_conf./insert_op.cfg --output./portrait --output_typeFP32 --input_shapeInputs/x_input:1,224,224,3 --framework3 --soc_versionAscend310直接获取om模型
wget https://modelzoo-train-atc.obs.cn-north-4.myhuaweicloud.com/003_Atc_Models/AE/ATC%20Model/PortraitNet%20/portrait.om获取样例需要的测试图片
cd ../data/
wget https://c7xcode.obs.cn-north-4.myhuaweicloud.com/models/Portrait/background.jpg
wget https://c7xcode.obs.cn-north-4.myhuaweicloud.com/models/Portrait/ori.jpgcd /root/samples/python/contrib/portrait_picture
python3 src/main.py
报错: No module named cv2python3.6 -m pip install opencv-python
报错: ModuleNotFoundError: No module named skbuildpython3.6 -m pip install scikit-build
安装成功后
python3.6 -m pip install opencv-python 在次执行: python3 src/main.py
init resource stage:
Init resource success
Init model resource start...
[Model] create model output dataset:
malloc output 0, size 401408
Create model output dataset success
Init model resource success
ori.jpg
in pre_process, use time:0.0037016868591308594
in inference, use time:0.006189584732055664
in post_process, use time:0.0028433799743652344
in background_replace, use time:0.09329771995544434
acl resource release all resource
dvpp resource release success
Model release source success
acl resource release stream
acl resource release context
Reset acl device 0
Release acl resource success
查看结果
ls outputs/result/ docker cp f1aaffa8be63:/root/samples/python/contrib/portrait_picture/outputs/result/ori.jpg ./
查看图片,图片的背景已经成功替换, 成功了测试ai项目地址 https://gitee.com/ascend/samples/tree/master/python/contrib/portrait_picture https://gitee.com/ascend/modelzoo/tree/master/contrib/TensorFlow/Research/cv/portraitnet/ATC_PortraitNet_tf_AE
