湛江模板建站系统,婚介网站模板,中国和城乡建设部网站,网站与客户端的区别创建正点原子的TF-A工作区#xff0c;目的是想查看正点原子的设备树文件“stm32mp157d-atk.dts”和设备树头文件“stm32mp157d-atk.dtsi”#xff0c;了解设备树是什么样子#xff0c;为后期基于“ST公司的源码”创建自己的设备树提供参考#xff0c;同时也是为了学习移植u…创建正点原子的TF-A工作区目的是想查看正点原子的设备树文件“stm32mp157d-atk.dts”和设备树头文件“stm32mp157d-atk.dtsi”了解设备树是什么样子为后期基于“ST公司的源码”创建自己的设备树提供参考同时也是为了学习移植uboot。
1、在Ubuntu桌面找到Visual Studio Code在图标上右击鼠标点击“打开”见下图 得到下图 2、点击“文件”再点击“打开文件夹”见下图 3、点击下图中的“其他位置” 4、点击“计算机”-à“home” -à“zgq”-à“linux”-à“atk_mp1”-à“alientek_tf-a”
见下图 5、点击 “确定” 6、将“欢迎使用”关闭再点击“文件”点击“将工作区另存为…”见下图操作 得到下图 7、输入“tf-a”再点击“保存”
得到下图 8、点击“tf-a-stm32mp-2.2.r1”得到下图 9、点击“fdts”,然后点击“stm32mp157d-atk.dts”查看设备树文件见下图 “stm32mp157d-atk.dts”内容如下
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
/* * Copyright (C) STMicroelectronics 2019 - All Rights Reserved * Author: Alexandre Torgue alexandre.torguest.com for STMicroelectronics. */
/dts-v1/; #include stm32mp157.dtsi
#include stm32mp15xd.dtsi
#include stm32mp15-pinctrl.dtsi
#include stm32mp15xxaa-pinctrl.dtsi
#include stm32mp157d-atk.dtsi
#include dt-bindings/soc/st,stm32-etzpc.h / {
model STMicroelectronics STM32MP157D eval daughter;
compatible st,stm32mp157d-atk, st,stm32mp157; chosen {
stdout-path serial0:115200n8;
}; aliases {
serial0 uart4;
};
}; cpu1 {
cpu-supply vddcore;
}; etzpc {
st,decprot
DECPROT(STM32MP1_ETZPC_USART1_ID,DECPROT_NS_RW,DECPROT_UNLOCK)
DECPROT(STM32MP1_ETZPC_SPI6_ID, DECPROT_NS_RW, DECPROT_UNLOCK)
DECPROT(STM32MP1_ETZPC_I2C4_ID, DECPROT_NS_RW, DECPROT_UNLOCK)
DECPROT(STM32MP1_ETZPC_I2C6_ID, DECPROT_NS_RW, DECPROT_UNLOCK)
DECPROT(STM32MP1_ETZPC_RNG1_ID, DECPROT_NS_RW, DECPROT_UNLOCK)
DECPROT(STM32MP1_ETZPC_HASH1_ID, DECPROT_NS_RW, DECPROT_UNLOCK)
DECPROT(STM32MP1_ETZPC_DDRCTRL_ID, DECPROT_S_RW, DECPROT_LOCK)
DECPROT(STM32MP1_ETZPC_DDRPHYC_ID, DECPROT_S_RW, DECPROT_LOCK)
DECPROT(STM32MP1_ETZPC_STGENC_ID, DECPROT_S_RW, DECPROT_LOCK)
DECPROT(STM32MP1_ETZPC_BKPSRAM_ID, DECPROT_S_RW, DECPROT_LOCK)
DECPROT(STM32MP1_ETZPC_IWDG1_ID, DECPROT_S_RW, DECPROT_LOCK)
;
};
10、点击“fdts”,然后点击“stm32mp157d-atk.dtsi”查看设备树头文件见下图 “stm32mp157d-atk.dtsi”内容如下
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
/* * Copyright (C) STMicroelectronics 2017 - All Rights Reserved * Author: Ludovic Barre ludovic.barrest.com for STMicroelectronics. */ #include dt-bindings/clock/stm32mp1-clksrc.h
#include dt-bindings/power/stm32mp1-power.h
#include stm32mp15-ddr3-2x4Gb-1066-binG.dtsi / {
memoryc0000000 {
device_type memory;
reg 0xC0000000 0x40000000;
}; vddcore: regulator-vddcore { compatible regulator-fixed; regulator-name vddcore; regulator-min-microvolt 1200000; regulator-max-microvolt 1350000; regulator-off-in-suspend; regulator-always-on; }; vdd_ddr: regulator-vdd-ddr { compatible regulator-fixed; regulator-name vdd_ddr; regulator-min-microvolt 1350000; regulator-max-microvolt 1350000; regulator-off-in-suspend; regulator-always-on; }; vdda: regulator-vvdda { compatible regulator-fixed; regulator-name vdda; regulator-min-microvolt 2900000; regulator-max-microvolt 2900000; regulator-off-in-suspend; regulator-always-on; }; vtt_ddr: regulator-vtt-ddr { compatible regulator-fixed; regulator-name vtt_ddr; regulator-min-microvolt 500000; regulator-max-microvolt 750000; regulator-off-in-suspend; regulator-always-on; }; v3v3: regulator-3p3v { compatible regulator-fixed; regulator-name v3v3; regulator-min-microvolt 3300000; regulator-max-microvolt 3300000; regulator-off-in-suspend; regulator-always-on; }; v1v8_audio: regulator-v1v8-audio { compatible regulator-fixed; regulator-name v1v8_audio; regulator-min-microvolt 1800000; regulator-max-microvolt 1800000; regulator-off-in-suspend; regulator-always-on; }; v3v3_hdmi: regulator-v3v3-hdmi { compatible regulator-fixed; regulator-name v3v3_hdmi; regulator-min-microvolt 3300000; regulator-max-microvolt 3300000; regulator-off-in-suspend; regulator-always-on; }; v1v2_hdmi: regulator-v1v2-hdmi { compatible regulator-fixed; regulator-name v1v2_hdmi; regulator-min-microvolt 1200000; regulator-max-microvolt 1200000; regulator-off-in-suspend; regulator-always-on; }; vdd: regulator-vdd { compatible regulator-fixed; regulator-name vdd; regulator-min-microvolt 3300000; regulator-max-microvolt 3300000; regulator-off-in-suspend; regulator-always-on; }; vdd_usb: regulator-vdd-usb { compatible regulator-fixed; regulator-name vdd_usb; regulator-min-microvolt 3300000; regulator-max-microvolt 3300000; regulator-off-in-suspend; regulator-always-on; }; v2v8: regulator-v2v8 { compatible regulator-fixed; regulator-name v2v8; regulator-min-microvolt 2800000; regulator-max-microvolt 2800000; regulator-off-in-suspend; regulator-always-on; };
}; bsec {
board_id: board_idec {
reg 0xec 0x4;
st,non-secure-otp;
};
}; clk_hse {
st,digbypass;
}; cpu0{
cpu-supply vddcore;
}; hash1 {
status okay;
}; iwdg2 { timeout-sec 32; status okay; secure-status okay;
}; nvmem_layout {
nvmem-cells cfg0_otp, part_number_otp, monotonic_otp, nand_otp, uid_otp, package_otp, hw2_otp, pkh_otp, board_id; nvmem-cell-names cfg0_otp, part_number_otp, monotonic_otp, nand_otp, uid_otp, package_otp, hw2_otp, pkh_otp, board_id;
}; pwr_regulators {
system_suspend_supported_soc_modes
STM32_PM_CSLEEP_RUN
STM32_PM_CSTOP_ALLOW_LP_STOP
STM32_PM_CSTOP_ALLOW_LPLV_STOP
STM32_PM_CSTOP_ALLOW_STANDBY_DDR_SR
;
system_off_soc_mode STM32_PM_CSTOP_ALLOW_STANDBY_DDR_OFF;
vdd-supply vdd;
vdd_3v3_usbfs-supply vdd_usb;
}; rcc {
st,hsi-cal;
st,csi-cal;
st,cal-sec 60;
st,clksrc
CLK_MPU_PLL1P
CLK_AXI_PLL2P
CLK_MCU_PLL3P
CLK_PLL12_HSE
CLK_PLL3_HSE
CLK_PLL4_HSE
CLK_RTC_LSE
CLK_MCO1_DISABLED
CLK_MCO2_DISABLED
; st,clkdiv
1 /*MPU*/
0 /*AXI*/
0 /*MCU*/
1 /*APB1*/
1 /*APB2*/
1 /*APB3*/
1 /*APB4*/
2 /*APB5*/
23 /*RTC*/
0 /*MCO1*/
0 /*MCO2*/
; st,pkcs
CLK_CKPER_HSE
CLK_FMC_ACLK
CLK_QSPI_ACLK
CLK_ETH_DISABLED
CLK_SDMMC12_PLL4P
CLK_DSI_DSIPLL
CLK_STGEN_HSE
CLK_USBPHY_HSE
CLK_SPI2S1_PLL3Q
CLK_SPI2S23_PLL3Q
CLK_SPI45_HSI
CLK_SPI6_HSI
CLK_I2C46_HSI
CLK_SDMMC3_PLL4P
CLK_USBO_USBPHY
CLK_ADC_CKPER
CLK_CEC_LSE
CLK_I2C12_HSI
CLK_I2C35_HSI
CLK_UART1_HSI
CLK_UART24_HSI
CLK_UART35_HSI
CLK_UART6_HSI
CLK_UART78_HSI
CLK_SPDIF_PLL4P
CLK_FDCAN_PLL4R
CLK_SAI1_PLL3Q
CLK_SAI2_PLL3Q
CLK_SAI3_PLL3Q
CLK_SAI4_PLL3Q
CLK_RNG1_LSI
CLK_RNG2_LSI
CLK_LPTIM1_PCLK1
CLK_LPTIM23_PCLK3
CLK_LPTIM45_LSE
; /* VCO 1066.0 MHz P 266 (AXI), Q 533 (GPU), R 533 (DDR) */
pll2: st,pll1 {
compatible st,stm32mp1-pll;
reg 1;
cfg 2 65 1 0 0 PQR(1,1,1);
frac 0x1400;
}; /* VCO 417.8 MHz P 209, Q 24, R 11 */
pll3: st,pll2 {
compatible st,stm32mp1-pll;
reg 2;
cfg 1 33 1 16 36 PQR(1,1,1);
frac 0x1a04;
}; /* VCO 594.0 MHz P 99, Q 74, R 74 */
pll4: st,pll3 {
compatible st,stm32mp1-pll;
reg 3;
cfg 3 98 5 7 7 PQR(1,1,1);
};
}; sdmmc1 {
pinctrl-names default;
pinctrl-0 sdmmc1_b4_pins_a sdmmc1_dir_pins_a;
st,neg-edge; broken-cd;
bus-width 4;
vmmc-supply v3v3;
status okay;
}; sdmmc2 {
pinctrl-names default;
pinctrl-0 sdmmc2_b4_pins_a sdmmc2_d47_pins_a;
non-removable;
st,neg-edge;
bus-width 8;
vmmc-supply v3v3; vqmmc-supply v3v3;
status okay;
}; uart4 {
pinctrl-names default;
pinctrl-0 uart4_pins_a;
status okay;
}; usbotg_hs {
phys usbphyc_port1 0;
phy-names usb2-phy;
usb-role-switch;
status okay;
}; usbphyc {
status okay;
}; usbphyc_port0 {
phy-supply vdd_usb;
}; usbphyc_port1 {
phy-supply vdd_usb;
};
