国外推广网站,网页加速器怎么开,可以做链接的网站,嘉兴营销型网站建设目录 一、LVSKeepalived高可用群集
1、实验环境
2、 主和备keepalived的配置
2.1 yum安装ipvsadm和keepalived工具
2.2 添加ip_vs模块并开启ipvsadm
2.3 修改keepalived的配置文件
2.4 调整proc响应参数#xff0c;关闭linux内核的重定向参数响应
2.5 将主服务器的kee…目录 一、LVSKeepalived高可用群集
1、实验环境
2、 主和备keepalived的配置
2.1 yum安装ipvsadm和keepalived工具
2.2 添加ip_vs模块并开启ipvsadm
2.3 修改keepalived的配置文件
2.4 调整proc响应参数关闭linux内核的重定向参数响应
2.5 将主服务器的keepalived的配置文件远程传输到备服务器上,并进行必要的修改
3、 真实web服务器的配置web1web2配置一样
3.1 下载httpd服务
3.2 配置VIP地址
3.3 修改配置使得系统只响应目的ip为本地ip的请求
3.4 配置访问默认页面内容
4、测试
4.1 将主服务器关闭
二、非抢占模式
三、延迟抢占 一、LVSKeepalived高可用群集
1、实验环境 主keepalived192.168.80.100 lvs 备keepalived192.168.80.101 lvs web1192.168.80.102 web2192.168.80.103 vip192.168.80.188 客户机访问 2、 主和备keepalived的配置
2.1 yum安装ipvsadm和keepalived工具
#关闭防火墙和selinux服务
[rootlocalhost ~]#systemctl stop firewalld.service
[rootlocalhost ~]#setenforce 0#yum安装keepalived和ipvsadm工具
[rootlocalhost ~]#yum install ipvsadm keepalived -y 2.2 添加ip_vs模块并开启ipvsadm
#添加ip_vs模块
[rootlocalhost ~]#modprobe ip_vs
[rootlocalhost ~]#cat /proc/net/ip_vs
IP Virtual Server version 1.2.1 (size4096)
Prot LocalAddress:Port Scheduler Flags- RemoteAddress:Port Forward Weight ActiveConn InActConn
#保存原来的配置并开启ipvsadm
[rootlocalhost keepalived]#ipvsadm-save /etc/sysconfig/ipvsadm
[rootlocalhost keepalived]#systemctl start ipvsadm.service 2.3 修改keepalived的配置文件
[rootlocalhost keepalived]#cd /etc/keepalived/
[rootlocalhost keepalived]#cp keepalived.conf keepalived.conf.bak
#复制一份备份使用#修改keepalived的配置文件
[rootlocalhost keepalived]#vim keepalived.conf
global_defs {router_id HA_TEST_R2 ####本路由器的服务器名称 HA_TEST_R2
}
vrrp_instance VI_1 { ####定义VRRP热备实列state BACKUP ####热备状态backup表示辅服务器interface ens33 ####表示承载VIP地址的物理接口virtual_router_id 1 ####虚拟路由器的ID号每个热备组保持一致priority 99 ####优先级优先级越大优先级越高advert_int 1 ####通告间隔秒数心跳频率authentication { ####认证信息每个热备组保持一致auth_type PASS ####认证类型auth_pass 123456 ####认证密码}virtual_ipaddress { ####漂移地址VIP可以是多个192.168.100.10}
}#需要修改项
global_defs {notification_email {acassenfirewall.locfailoverfirewall.locsysadminfirewall.loc}notification_email_from Alexandre.Cassenfirewall.locsmtp_server 127.0.0.1#修改邮箱指向自己10行smtp_connect_timeout 30router_id LVS_01#指定服务器名称主备需要不一样12行vrrp_skip_check_adv_addr#vrrp_strict#14行需要注释否则服务启动有问题vrrp_garp_interval 0vrrp_gna_interval 0
}vrrp_instance VI_1 {state MASTER#指定服务器类型MASTER为主 BACKUP为备20行interface ens33#修改网卡名称为ens3321virtual_router_id 10#指定虚拟路由器的ID号主备需要一致#nopreempt #非抢占模式两个节点都需要配置去掉注释priority 100#设定优先级数字越大优先级越高准备需要不一样advert_int 1#通告间隔查看是否存活authentication {auth_type PASS#认证类型auth_pass 123456#修改验证密码主备需要一样27行}virtual_ipaddress {192.168.80.188#指定群集vip地址}
}
virtual_server 192.168.80.188 80 {delay_loop 6#健康间隔时间6秒lb_algo rr#调度算法轮询lb_kind DR#lvs模式为DR persistence_timeout 0#连接保持时间改为0 否则 无法体现效果protocol TCP#采用协议real_server 192.168.91.102 80 {#43行修改地址为真实主机地址weight 1#45行删除#节点权重TCP_CHECK{connect_port 80#检查目标端口connect_timeout 3#连接超时 nb_get_retry 3#重试次数delay_before_retry 3#重试间隔时间}}real_server 192.168.80.103 80 {#第二个weight 1TCP_CHECK{connect_port 80connect_timeout 3nb_get_retry 3delay_before_retry 3}}2.4 调整proc响应参数关闭linux内核的重定向参数响应
#启动服务、查看虚拟网卡vip
systemctl start keepalived
ip addr show dev ens33 #调整proc响应参数关闭Linux内核的重定向参数响应
vim /etc/sysctl.conf
net.ipv4.ip_forward 1
net.ipv4.conf.all.send_redirects 0
net.ipv4.conf.default.send_redirects 0
net.ipv4.conf.ens33.send_redirects 0#刷新一下
sysctl -p 2.5 将主服务器的keepalived的配置文件远程传输到备服务器上,并进行必要的修改
[rootlocalhost keepalived]#scp keepalived.conf root192.168.80.101:/etc/keepalived/[rootlocalhost keepalived]#vim keepalived.conf
#备份keepalive
12 router_id LVS_02
20 state BACKUP
23 priority 99
[rootlocalhost keepalived]#systemctl start keepalived.service
[rootlocalhost keepalived]#ipvsadm
[rootlocalhost keepalived]#ipvsadm -ln
[rootlocalhost keepalived]#vim /etc/sysctl.conf
[rootlocalhost keepalived]#sysctl -p
net.ipv4.conf.all.send_redirects 0
net.ipv4.conf.default.send_redirects 0
net.ipv4.conf.ens33.send_redirects 0 3、 真实web服务器的配置web1web2配置一样
3.1 下载httpd服务
[rootlocalhost ~]# systemctl stop firewalld.service
[rootlocalhost ~]# setenforce 0
[rootlocalhost ~]# yum install -y httpd3.2 配置VIP地址
[rootlocalhost network-scripts]# cp ifcfg-lo ifcfg-lo:0
[rootlocalhost network-scripts]# vim ifcfg-lo:0[rootlocalhost network-scripts]# cat /etc/sysconfig/network-scripts/ifcfg-lo:0
DEVICElo:0
IPADDR192.168.80.188
NETMASK255.255.255.255
NETWORK127.0.0.0[rootlocalhost network-scripts]# ifup lo:0
[rootlocalhost network-scripts]# systemctl restart network3.3 修改配置使得系统只响应目的ip为本地ip的请求
[rootlocalhost network-scripts]# vim /etc/sysctl.conf
[rootlocalhost network-scripts]# sysctl -p
net.ipv4.conf.all.arp_ignore 1
net.ipv4.conf.all.arp_announce 2
net.ipv4.conf.default.arp_ignore 1
net.ipv4.conf.default.arp_announce 2
net.ipv4.conf.lo.arp_ignore 1
net.ipv4.conf.lo.arp_announce 2
[rootlocalhost network-scripts]# route add -host 192.168.80.188 lo:03.4 配置访问默认页面内容 4、测试 4.1 将主服务器关闭
此时虚拟VIP在备用服务器且依旧可以访问网站 关闭主服务器我们也可以抓包来看变化
--关闭主服务器时是192.168.80.101 --开启主服务器后主服务器会抢占因为主服务器优先级高又会变成主服务器192.168.80.100 二、非抢占模式 默认模式使用的 抢占式上面的实验使用的就是抢占模式 主节点会抢占回来会造成两次网络动荡。 #注意要关闭 VIP抢占必须将各 keepalived 服务器state配置为BACKUP #1主机配置
vrrp_instance VI_1 {state BACKUP #都为BACKUPinterface ens33virtual_router_id 66priority 100 #优先级高advert_int 1nopreempt #添加此行都为nopreempt
#2主机配置
vrrp_instance VI_1 {state BACKUP #都为BACKUPinterface ens33virtual_router_id 66priority 80 #优先级低advert_int 1nopreempt #添加此行都为nopreempt 三、延迟抢占
#延迟抢占
preempt_delay # #指定抢占延迟时间为#s默认延迟300s
#注意需要各keepalived服务器state为BACKUP,并且不要启用 vrrp_strict
#1主机配置
vrrp_instance VI_1 {state BACKUP #都为BACKUPinterface eth0virtual_router_id 66priority 100 #优先级高advert_int 1 preempt_delay 30 #抢占延迟模式默认延迟300s#2主机配置
vrrp_instance VI_1 {state BACKUP #都为BACKUPinterface eth0virtual_router_id 66priority 80 #优先级低advert_int 1 priority 80 #优先级高advert_int 1 preempt_delay 60 #抢占延迟模式默认延迟300s
