上海网站建设公司哪家好?,北京别墅设计网站,编程开发工具大全,iis 无法启动此网站最近工作需要在 UEFI Shell 下Check EC Ram 的设定#xff0c;发现手上只有 Windows 下的读取工具(RW Everything)。于是研究了一下如何在Shell 读取 EC Ram。根据【参考1】读取的流程如下#xff1a;Port 66 CommandsThere are also some EC commands that use ports 0x66 …最近工作需要在 UEFI Shell 下Check EC Ram 的设定发现手上只有 Windows 下的读取工具(RW Everything)。于是研究了一下如何在Shell 读取 EC Ram。根据【参考1】读取的流程如下Port 66 CommandsThere are also some EC commands that use ports 0x66 and0x62. Some of these are standard ACPI commands as defined in the external ACPIspec, others are custom.The port 66 protocol is essentially the standard ACPI ECinterface protocol.1. Wait for port66.IBF 02. Write command byte to port 66.3. For each outgoing data or address byte:3a. Wait for port66.IBF 03b. Write data or address byte to port 62.4. For each incoming data byte:4a. Wait for port66.OBF 14b. Read data byte from port 62.5. If the command requires no data or address bytes, you candetermine when the command was accepted/executed by waiting for port66.IBF0.同时 ACPI 定义的通用 Command如下ACPI-defined port 66 commands0x80 Read EC (write 0x80 to port 66, write address byte toport 62, read data byte from port 62)0x81 Write EC (write 0x81 to port 66, write address byte toport 62, write data byte to port 62)0x82 Burst Enable (write 0x82 to port 66, read data bytefrom port 62 - the data byte is burst ACK, value 0x90)0x83 Burst Disable (write 0x83 to port 66, wait forport66.IBF0)0x84 Query EC (i.e. read SCI event queue) (write 0x84 toport 66, read data byte from port 62). When the data byte is 0, it means thatthe SCI event queue is empty.最终根据上述资料编写一个 Application 如下#include #include #include #include extern EFI_SYSTEM_TABLE *gST;extern EFI_BOOT_SERVICES *gBS;#define TIMEOUT 0xFFFF#define ECCOMMAND 0x66#define ECSTATUS 0x66#define ECDATA 0x62#define EC_S_OBF BIT0#define EC_S_IBF BIT1#define ECREADCMD 0x80UINT8 MemBuffer[16][16];void WaitIBF() {UINT32 Status;UINTN Count;Count 0;Status 0;Status IoRead8 (ECSTATUS);while (((Status EC_S_IBF) ! 0)||(CountTIMEOUT)) {Status IoRead8 (ECSTATUS);Count;}}void WaitOBF() {UINT32 Status;UINTN Count;Count 0;Status 0;Status IoRead8 (ECSTATUS);while (((Status EC_S_OBF) 0)||(CountTIMEOUT)) {Status IoRead8 (ECSTATUS);Count;}}UINT8 ReadECRam(UINT8 Index) {WaitIBF(); //1IoWrite8(ECCOMMAND,0x80);//2WaitIBF(); //3aIoWrite8(ECDATA, Index); //3bWaitOBF(); //4areturn IoRead8(ECDATA); //4b}void GetData(){UINT8 i,j;for (i0;i16;i)for (j0;j16;j) {MemBuffer[i][j]ReadECRam(i*16j);}}void ShowData(){UINT8 i,j;Print(L );for (i0;i16;i) Print(L%02X ,i);Print(L\n);for (i0;i16;i) {Print(L%02X: ,i);for (j0;j16;j) {Print(L%02X ,MemBuffer[i][j]);}Print(L\n);}Print(L\n);}/***Print a welcoming message.Establishes the main structure of the application.retval 0 The application exited normally.retval Other An error occurred.***/INTNEFIAPIShellAppMain (IN UINTN Argc,IN CHAR16 **Argv){EFI_INPUT_KEY Key;Key.ScanCodeSCAN_NULL;while (SCAN_UP!Key.ScanCode){gST-ConOut-ClearScreen(gST-ConOut);GetData();ShowData();gST - ConIn - ReadKeyStroke(gST-ConIn,Key);Print(LPress Arrow-Up to exit\n);gBS-Stall(1000000UL);}return(0);}在实体机上运行结果如下(按向上键退出)源代码和Application(X64)下载参考1. http://wiki.laptop.org/go/Ec_specification
